https://wotawallysbits.net
Reskins
Click on images to download the files
Reskins of RSC\PDL Class 37 (Portsmouth Direct Line)
By Paul Williams
Four variants of the PDL Class 37 in BR Blue livery: Domino Headcode Box Light Weathering, Domino Heavy Weathring, Yellow Headcode Box Light Weathering and Yellow HC Heavy Weathering.
The purpose of the reskin is to provide an unrefurbished, central Headcode variant in BR Blue livery.
Thanks to Ben Yates for the use of his original textures from his reskin of the RSC Class 37 DLC
By Paul Williams
Four variants of the PDL Class 37 in BR Blue livery: Domino Headcode Box Light Weathering, Domino Heavy Weathring, Yellow Headcode Box Light Weathering and Yellow HC Heavy Weathering.
The purpose of the reskin is to provide an unrefurbished, central Headcode variant in BR Blue livery.
Thanks to Ben Yates for the use of his original textures from his reskin of the RSC Class 37 DLC
Richard Maxted Scenery Packs: Re-skins
A selection of quick re-skins to make Richard's models slightly more suited to Southern and Eastern England. The stone housing was turned to brick and I also did a couple of "huts" that are frequently used as offices or classrooms. A lot of the Railway buildings were just lightened
Commercial, Housing, Railway - 3 Pack
If you want all three packs then use this link to download the three packs in one download, and then install them all together using this option.
If you want all three packs then use this link to download the three packs in one download, and then install them all together using this option.
Pack 1 - Commercial Buildings Re-skins
This is a selection of re-skins from Richard Maxted's "Commercial" pack
This is a selection of re-skins from Richard Maxted's "Commercial" pack
Pack 2 - Housing Buildings Re-skins
This is a selection of re-skins from Richard Maxted's "Housing" pack. Basically, I turned stone textures to brick textures.
This is a selection of re-skins from Richard Maxted's "Housing" pack. Basically, I turned stone textures to brick textures.
Pack 3 - Railway Buildings Re-skins
This is a selection of re-skins from Richard Maxted's "Railway" pack
This is a selection of re-skins from Richard Maxted's "Railway" pack
TS20** - Kuju Red Bus Replacement.
Fed up with all the Red and White buses, that stand out like a sore thumb on many routes?
This changes them to Green double-deckers similar to those on the Isle of Wight and many other rural areas.
This "fix" works on all routes that use the Kuju vehicles.
Fed up with all the Red and White buses, that stand out like a sore thumb on many routes?
This changes them to Green double-deckers similar to those on the Isle of Wight and many other rural areas.
This "fix" works on all routes that use the Kuju vehicles.
Reskin of RSC Class 421Pack01_v1
This is a reskin to make a 4-CIG usable in their early years and also before they were actually built. The variants can be used to represent the very early 4-CIG, the 4-CEP and possibly 4-COR
The reskins are
1: Full Yellow front and 1st Class Yellow Stripe
2: Yellow Front Panel - no 1st Class Stripe, BR Logo
3: All Green, BR Logo.
The DCTLs also come as DSTLs (2nd Class only).
All come with and without Driver and/or passengers.
Older style interior to give a more authentic look for the era.
IMPORTANT
Install the rwp file using the Railworks Utility Package Manager.
Then - navigate to your Railworks\Assets\RSC folder and RUN "INSTALL BRGREEN_WW CLASS 421.BAT" to install the Geopcdx files to the reskins.
Clear the Blueprints Cache before trying to use the new reskins.
This is a reskin to make a 4-CIG usable in their early years and also before they were actually built. The variants can be used to represent the very early 4-CIG, the 4-CEP and possibly 4-COR
The reskins are
1: Full Yellow front and 1st Class Yellow Stripe
2: Yellow Front Panel - no 1st Class Stripe, BR Logo
3: All Green, BR Logo.
The DCTLs also come as DSTLs (2nd Class only).
All come with and without Driver and/or passengers.
Older style interior to give a more authentic look for the era.
IMPORTANT
Install the rwp file using the Railworks Utility Package Manager.
Then - navigate to your Railworks\Assets\RSC folder and RUN "INSTALL BRGREEN_WW CLASS 421.BAT" to install the Geopcdx files to the reskins.
Clear the Blueprints Cache before trying to use the new reskins.
Reskin of RSC Class 422Pack01_v1
This is a reskin to make a 4-BIG usable in their early years and also before they were actually built. The variants can be used to represent the very early 4-CIG, or with a bit of imagination the Old Green Buffet can be added to the the Old Green Class 421 reskin (above) to make a 4-BUF for the Portsmouth route
The reskins are
1:DCTL Full Yellow front and 1st Class Yellow Stripe
2: MBS All Green
3: TRB with Red Stripe and all Green
The DCTLs also come as DSTLs (2nd Class only).
All come with and without Driver and/or passengers.
TRBs have no passengers - I tried adding them but they ended up sitting in the aisles as well
Older style interior included to give a more authentic look for the era.
IMPORTANT
Install the rwp file using the Railworks Utility Package Manager.
Then - navigate to your Railworks\Assets\RSC folder and RUN "INSTALL BRGREEN_WW CLASS 422-P01.BAT" to install the Geopcdx files to the reskins.
Clear the Blueprints Cache before trying to use the new reskins.
This is a reskin to make a 4-BIG usable in their early years and also before they were actually built. The variants can be used to represent the very early 4-CIG, or with a bit of imagination the Old Green Buffet can be added to the the Old Green Class 421 reskin (above) to make a 4-BUF for the Portsmouth route
The reskins are
1:DCTL Full Yellow front and 1st Class Yellow Stripe
2: MBS All Green
3: TRB with Red Stripe and all Green
The DCTLs also come as DSTLs (2nd Class only).
All come with and without Driver and/or passengers.
TRBs have no passengers - I tried adding them but they ended up sitting in the aisles as well
Older style interior included to give a more authentic look for the era.
IMPORTANT
Install the rwp file using the Railworks Utility Package Manager.
Then - navigate to your Railworks\Assets\RSC folder and RUN "INSTALL BRGREEN_WW CLASS 422-P01.BAT" to install the Geopcdx files to the reskins.
Clear the Blueprints Cache before trying to use the new reskins.
Reskins of DTG Class 402_v2
This a quick re-skin to make two BR Green versions of the DTG Class 402.
Version 2 removes the incorrect triangles on the DTCL carriages - Thanks to Geoff for educating me about the triangles. (I have not changed the photo)
IMPORTANT
After you have installed the RWP using the Utilities Package Manager you will need to copy over the GeoPcDx files.
Navigate to your RailWorks\Assets\DTG\Class402Pack01 and RUN "InstallMe_Class402_BRGreen.bat" (or Right-Click and select "Open") to install the Geopcdx files to the reskins.
Clear the Blueprints Cache before trying to use the new reskins.
This a quick re-skin to make two BR Green versions of the DTG Class 402.
Version 2 removes the incorrect triangles on the DTCL carriages - Thanks to Geoff for educating me about the triangles. (I have not changed the photo)
IMPORTANT
After you have installed the RWP using the Utilities Package Manager you will need to copy over the GeoPcDx files.
Navigate to your RailWorks\Assets\DTG\Class402Pack01 and RUN "InstallMe_Class402_BRGreen.bat" (or Right-Click and select "Open") to install the Geopcdx files to the reskins.
Clear the Blueprints Cache before trying to use the new reskins.
Re-skins of the Kuju Class55 Deltics_v4 QD enabled
Reskins of the Green Class 55 Deltic to a version with a full Yellow front which the Deltics were given from ‘66/7 until they were all painted blue.
Also included is D9010 which had the new BR Arrows logo on it whilst still in Green livery from Dec ’66 to Feb ’68.
Blue Livery – Pre-TOPS numbers, without the “D” as used on the Deltics between 1970-1974.
Blue Livery with White Window surrounds.
Manual included with the dates of the livery/number changes
Reskins of the Green Class 55 Deltic to a version with a full Yellow front which the Deltics were given from ‘66/7 until they were all painted blue.
Also included is D9010 which had the new BR Arrows logo on it whilst still in Green livery from Dec ’66 to Feb ’68.
Blue Livery – Pre-TOPS numbers, without the “D” as used on the Deltics between 1970-1974.
Blue Livery with White Window surrounds.
Manual included with the dates of the livery/number changes
Re-skins of Jeff Layfield's Motorbikes
This a set of five reskins of Jeff Layfield's BSA Motorbikes. I have added extra colours, improved the badge and number plates a bit.
To use them in TSClassic you need to enable "JeffLayf - Scenery" in the providers list.
You can find the motorbikes in "People/Animals/Vehicles" and scroll down to "Motorbike_(Colour)_WW"
The Original bikes are in this download from UKTS: UKTS 28913
(The pub is from "WW_Pubs" and the bikers are from "WW_2000_People_Packs (01, 02)" - both on the "Scenery Items" page)
This a set of five reskins of Jeff Layfield's BSA Motorbikes. I have added extra colours, improved the badge and number plates a bit.
To use them in TSClassic you need to enable "JeffLayf - Scenery" in the providers list.
You can find the motorbikes in "People/Animals/Vehicles" and scroll down to "Motorbike_(Colour)_WW"
The Original bikes are in this download from UKTS: UKTS 28913
(The pub is from "WW_Pubs" and the bikers are from "WW_2000_People_Packs (01, 02)" - both on the "Scenery Items" page)
WW_LT_Old_Red-Buses_01
Original models by Kevin McGowan.
I have several versions and reskins of the Leyland and AEC double-deck buses in my Wilburton\Stockton folder - these RTs and RTLs are reskins of the Eastbourne buses.
These buses are just depictions of the London buses: LT had their buses made to their own specifications which were very different to the standard models as modelled here by Kevin. Among the differences are: front cab window, number of windows on both decks, lack of route blind above passenger entrance, top rear window etc.
Original models by Kevin McGowan.
I have several versions and reskins of the Leyland and AEC double-deck buses in my Wilburton\Stockton folder - these RTs and RTLs are reskins of the Eastbourne buses.
These buses are just depictions of the London buses: LT had their buses made to their own specifications which were very different to the standard models as modelled here by Kevin. Among the differences are: front cab window, number of windows on both decks, lack of route blind above passenger entrance, top rear window etc.